Heavy Duty Pontoon Boat Tops (8'W x 10' L Pontoon Bimini with Boot)
8' x 10' heavy duty pontoon boat bimini top package .
Pontoon bimini top package includes 1-1/4" framework w/ adjustable front struts, mounting hardware, wiring, zip on premium solution dyed polyester bimini fabric and storage boot.
- Easy to assembly pontoon bimini frame snaps together with stainless steel snap buttons.
- Zippered pockets allow you to quickly install your pontoon boat canopy top fabric.
- Adjustable front struts replace straps for more secure mounting.
- Stainless mounting bolts are included to secure your pontoon frame's brackets to your railing.
- Stainless push pins attach framework to your pontoon boat quickly and easily.
- Framework is designed to fit 8' wide pontoon boats with railing between 88" to 96" wide.
- This pontoon boat top opens up to cover an 8' x 10' area on your pontoon boat.
- Standing height in center of open pontoon canopy top is approximately 75".
PontoonStuff® Quality Promise
Our success is tied directly to our ability to provide you with quality products and the best customer service. Quality and excellent service are our top priority!
- Industry leading warranty - 3 year full replacement on defective bimini tops.
- If your bimini tops arrives with any defects or quality issues, we will pay to return and replace your bimini tops immediately.
- We pay all costs associated with any damage or defects. There is never any cost to you.
- 100% transferable warranty - if you sell your pontoon boat, the buyer is covered. If you're a second owner, just provide us with the original owner's name or order number.
You're making a big investment with your time and money when you choose to restore a pontoon boat. Making sure all of our customers know we will support them after the sale is important to us. We will take care of any problems you have quickly and at no cost to you, as we personally warranty everything we sell.
* For more information about our warranty, please click here or call (877) 295-9522.
QUESTIONS & ANSWERSAsk a Question
Can I get one with the light installed
Unfortunately, you would need to purchase it separately and install it yourself. The Bimini Top will come with all the hardware and wiring to complete that process for you.
Is the frame wired for a stern light?
Yes. This frame comes with the wiring needed to install a stern light. Unfortunately, it is not wired when you receive it. You will need to that yourself.
Do you sell an 8X12 top
No, unfortunately we do not carry any other sizes than what you see on our Website. The largest Bimini Top that we offer is the 8'6" x 10' .
Does this system have the stern light on top or do I buy it separate?
This Heavy Duty Pontoon Boat Top does not come with a Stern Light. It does however have a cut out on the Bimini Top for you to place a Stern Light.
Will this mount on 1" rails?
The mounting brackets for the Heavy Duty Pontoon Boat Top is made for 1 1/4" railing. We do not offer 1" mounting brackets unfortunately.
Can you get canvas only and not the frame
Yes. You will need to call us and place a manual order for this. The representative will double check to make sure this is ok.
What is the total distance between the fore and aft rail mounting brackets? Then, what is the distance between the aft bracket and the mid bracket? Thank you
The measurements that you are looking for are pictured in the featured pictures of the Heavy Duty Pontoon Boat Top. It would be from the Front to mid brackets, 34" and fromt he middle bracket to the rear 37".
Will this fit a 1996 Lowe 2220 deck boat?
Since we are specific, you would need to compare the measurements of the available space to the measurements we give on the products page to see if they would work for your Pontoon Boat.
Can we have plastic walls zipped from the edges? At least could it be an option that zipper could be sewn on the edges to install walls.
Unfortunately, this Heavy Duty Pontoon Boat Top is not designed to be an inclosed.
Is there any warranty as to how long this can vast should last
Our Heavy Duty Pontoon Boat Top has a 5 Year Warranty. That covers the Fabric and Frame. If you have any issues in that time frame please give us a call and send us pictures of the issue and we will get you taken care of.
So if we get this everything that we need to put it on and assemble is there? we just got our gently used 1994 harris and the old top is to heavy to lift without help
Yes. Our Heavy Duty Pontoon Boat Tops come with all the mounting hardware and include everything to make the installation very simple for your Pontoon Boat.
What's the warranty on Bimini tops
Our Heavy Duty Pontoon Boat Top has a 5 years warranty. While our Economy Pontoon Bimini Top has a 1 year warranty.
Is the top sewn and finished with NO raw edges
Yes, This top pontoon boat top is sewen with all finished edges.
Do you make the top in any other top fabric? If yes what is the warranty?
All of the pontoon fabrics we offer are a solution dyed polyester fabric.
What is the delivery time for bimi top to nj
We ship all pontoon bimini order the same day if ordered by 4 pm Est. It is about a 2 day transit time to New Jesey.
Can you drive with bimini top up? How fast can i go with it up?
We would not recommened driving your pontoon boat over 30 mph on the water with this top all the way open. We recommened completely closing your bimini top and resting it on the rails any time you trailer your pontoon boat.
What is the overhang dimension ahead of where front support fastens to side rail. Just wondering if it will interfere with entering and exiting the boat
It is hard to give you the over hang dimension of this pontoon bimini top and frame because it will depend on the distance of where the front mount is placed from your pontoon gate. The frame of the bimini top is about 75" inches tall once mounted on the rails of your pontoon boat. Even if it over hanges where your pontoon gate is, it should not cause any problems for people entering and exiting your pontoon boat.
Can I buy framework parts only?
We do not sell the replacement bimini top parts separately as they are designed around our framework and are not universal fit. What replacement parts specifically are you looking for? We can try to help if possible.
Do you sell just the top for 10'.
Unfortunately, we do not sell the 10' bimini fabric tops separate from the frame. We have tried but the return rate is approx. 80% so we stopped doing it. What we found is that beyond the standard 8' x 8' universal fit pontoon bimini top fabric we sell the larger frames are more custom and depending on the boat manufacturer and our fabrics simply don't fit well.
Do you offer any type of warranty on the frame and or the top itself? What is the material used for the top?
We have a 3 year warranty on both the frame and fabric top. The top is made out of solution dyed polyester.
When the tops are folded back, do they lay flat? Or at an angle? If at an angle how high above the rail does it lay?
They will flat into the mounting brackets that are about 4" above your rail.
The rail where the rear strut attaches is 6" shorter than the main rail. Can I get rear adjustable struts?
Yes, Both the front and rear struts adjust.
Do you sell bimini top kits for the front of a pontoon boat?
You can use any of our pontoon bimini tops on the front of the pontoon also. It won't matter where they top is mounted. You wouldn't be able to zip the two pontoon tops together but you can mount them in such a way that they cover the entire pontoon boat.
what about stern light cutout?
Yes, this complete bimini top package comes with the fabric and the storage boot. Both will have reinforced cut outs for the stern light.
Are the bows two pieces that splits in the middle or are they one complete piece
They are one complete piece on the Heavy Duty Pontoon Boat Top. They do have 2 joiner pieces, one on each side that connect them to the side assembly.
What is the fabrim material made of... and what UV protection it offers? Thanks
We use a premium solution dyed polyester bimini fabric on the Heavy Duty Pontoon Boat Top. It has UV protection that we keep the top from fading and also keeping the UV from coming through the fabric.
I have 2002 Sunchaser (lowe) it has a cover size layed out flat of 101"width x 108"length .Boat widthis 95"do you have a complete bimi ut that will fit ? i do have 1"rails can 1 1/4"frames be made to work?
Since the brackets for the Heavy Duty Pontoon Boat Tops are made for 1 1/4" railing, this will not work properly with 1" rails.
What is the width of the frame at the top just under the canvas, or just past the top bend?
If you have the frames at 90 degrees, the measurement comes to 96" wide of the Heavy Duty Pontoon Boat Top.
With is 96” should I get this one or the 8’
If you have 96" outside railing to outside railing we would recommend the 8' bimini top option. If its 96" inside railing to inside railing we would recommend the 8-1/2' bimini top option.
Will this fit/Is this compatible with a 2001 Crestliner pontoon?
We would need to know the distance between your railings to help suggest a proper fitment.
This particular frame needs an 8' wide pontoon that has railings between 88" to 96" wide.
We have a sundeck on the back of our pontoon that is 8" higher than the base rail. Are the rear rails adjustable?
Yes the back base rails are adjustable to help accommodate this bimini top and frame to fit your pontoon boat.
What kind of fabric
The heavy duty pontoon boat bimini top is made using a dyed polyester fabric.
The rails on our Hurricane Deck boat are 89" outside to outside, will this unit fit?
The heavy duty pontoon boat top 8' x 10' bimini will fit rails that are 88" to 96" wide so it should fit your application
How long does the rail have to be on each side to make the 8/10ft top to work Thanks
The Heavy Duty Pontoon Boat Top ( 8'w x 10'L ) bimini top needs a minimum of 87" of railing to work.
Can you get just the replacement top
Unfortunately we cannot sell just the Heavy duty 8' x 10' pontoon bimini top unless you already have purchased our frame.
If you already have our frame please give us a call and we can help you out.
Do you sell just the canvas by itself?
We do not sell just the canvas by itself as the 8x10 pontoon bimini top only fits our bimini frame. If you are looking for a replacement top for that model we would be happy to help if you already purchased ours with our bimini frame.
Are you able to get the 8 x 10 in Pacific Blue
Yes the pacific blue bimini top is the last option on the drop down menu.
My rails are only 92.5 inches wide, can I make this work?
Yes, This pontoon bimini frame and top will fit rails that are between 88" & 96" wide.
What kind of fabric is used for your bimini top. I cannot find anything that tells me or gives info about warranty. Thanks
We use a solution dyed polyester fabric that carries a 3 year warranty.
I have a small 6' wide by 15' long pontoon boat. I am looking for a Bimini Top to fit this narrow boat. Do you have them in narrower sizes?
I'm sorry but we do not offer any pontoon bimini tops any narrow then 8'
Can I get a 8 x10 bikini top without the frame?
we only offer an 8 x 8 pontoon top with out the frame. This is the only size we have found that will fit most other pontoon manufacors frames.
what’s the canopy fabric Sunbera ?
We do not offer the Sunbrella fabric. Our is Deck Mate premium, solution dyed polyester fabric.
I have your 8x8 Bimini top currently. I want to add this to the front half of the boat, is there a way to connect the two and have it properly shed water?
Unfortunately, no. Withour modifying the 2 Bimini Tops, you cannot attach them together.
Recently purchased power top that works great with exception of toggle switch. It’s 1/4” too short to secure stainless nut. Do you offer a longer toggle switch?
Unfortunately, we do not offer any different sizes for the toggle switch.
I have a 1990 pontoon and the measuring is rail 11/4 wide 87" from bracket to bracket long. 71/8 foot wide from side to side if I did it right. Lol. Does that sound right. I need a frame and fabric and all the hardware to go along with it. Or I'll just get the frame first to make sure it fits
It sounds like, either the the 8' by 10' or the 8' by 8' would work for you.
Hi, I'm looking for a bimini top that can be left up travelling in the water. My pontoon just has a 90 hp johnson and goes around 25 mph. What is your recommended speed limit for your product? How thick is your material cover and is your frame 1" square or larger? Thx, Sam
This Bimini Top is 1 1/4" framwork. We do not recommend using any top and leaving it up when traveling. 25 MPH should be the max that you can travel while the Top is up.
Are the frames pre wired for the stern light?
No, they do however come with wiring that you will need to feed through.
Just bought a 2014 26' Aloha Tropical triton yesterday that needs a top and light. I'm about 99% sure its 8' wide rail to rail. Are your tops adjustable at all if I'm an inch off here or there?
You should be just fine. These have a range of 88" to 96" that they will fit between.
I have a 2007 Triton model 200 F-R Gold pontoon boat. I need to replace the whole bimini top due to damage to the bows and cover. It is a fishing pontoon but the most unusal thing about is the rail is 2 levels. Do you have a replacement that would work for this boat?
Unfortuantely, not we do not offer a Bimini Top that will fit the style.
What is the spacing between side of front rail to back rail when in open position?
As it show in the pictures, from the fron to the ear mounting location is 71 inches.
Does this bimini top fit a Bennington 20SF?
You would need to compare your measurements to our measurements to determine if they will fit your Boat.
I need the back strut to be 91/4 inches longer than front because rail is shorter om rear of boat. Is there an adjustable back strut?
Unfortunately, we do not have an adjustable rear strut.
How much will the front struts adjust. The railing on front of my boat is about 6 inches lower than the rest
These adjust but unfortunately, only in a way that stretches the fabric. There are 6 spots about 1-2 inches apart.
Is there a way to put a light on the top of the back rail?
Yes. This Pontoon Boat Top is designed to have a stern light added to it.
Can I purchase just the canopy. I don't need the frame. Thanks
With this Pontoon Bimini Top, we cannot sell just the top without the frame.
Do you sell just the material without the frame? My frame is still good I just need to replace the material.
No, Unfortunately, we do not offer the Pontoon Fabric 8' x 10' separate from the framework.
We have a premiere 2006 pontoon. Will this fit the rails?
Since our products are universal, we go strictly by measurements. You would need to compare our measurements to the available space you have.