Pontoon Boat Seats (PRG6383)

Pontoon Furniture

$1,109.96 
SKU: PRG6383-300
Qty:  
FREE Same Day Shipping Order By 4pm est. Pontoon Seats In Stock.  

Note: pontoon boat seats must be supported against railing.

Premium Pontoon Boat Seats.

  • Plush, pillowed pontoon boat seats with quality double top stitching for that new boat look.
  • Our pontoon seats will last! The quality of your vinyl and foam won't matter if your seams tear or rot that's why we only use the best UV and mildew treated polyester thread.
  • 30 oz marine grade seat vinyl is coated and treated to exceed industry standards for UV and mildew resistance.
  • Each foam pontoon boat seat cushion is built with a mix of soft & dense foam to give you support and comfort where it matters most.
  • Seat bases with molded drain channels increase the life of your pontoon flooring by allowing water to escape your deck instead of being trapped and left to soak into your carpet and decking.
  • No wood! Enclosed plastic seat bases for storage and high impact plastic seat cushion frames will never rot or break. DeckMate® pontoon furniture has a lifetime warranty on all frame parts.
Overall Pontoon Seat Dimensions:
  • 63" minimum needed across rear of pontoon to install pontoon furniture
  • 83" minimum needed up port side for pontoon boat seating
  • (1) 55" pontoon boat lounge seats
  • (1) 28" pontoon boat corner seat
  • (1) 28" pontoon boat bench seat
  • (1) Right side pontoon boat seat arm with cup holders
  • Mounting hardware is included to secure seat bases to the deck of your pontoon boat

PontoonStuff® Quality Promise

Our success is tied directly to our ability to provide good customer service. If your pontoon boat furniture arrives with any defects or quality issues we will pay to return and replace your seating immediately. Simply contact us and we will take care of everything. 

  • Industry leading warranty - 3 year full replacement of any defective pontoon furniture.
  • We pay all shipping costs associated with any defects or warranty, no cost to you.
  • 100% transferable warranty - if you sell your boat the buyer is covered, just provide us with an original order number.

PontoonStuff® Quality Promise
Our success is tied directly to our ability to provide you with quality products and the best customer service. Quality and excellent service are our top priority!

  • Industry leading warranty - 3 year full replacement on any defective pontoon furniture. No other pontoon boat seat manufacturer offers this level of service because no other manufacturer uses the same quality of materials.
  • If your pontoon boat furniture arrives with any defects or quality issues, we will pay to return and replace your pontoon boat seats immediately.
  • We pay all costs associated with any damaged or defective seating. There is never any cost to you.
  • 100% transferable warranty - if you sell your pontoon boat, the buyer is covered. If you're a second owner, just provide us with the original owner's name or order number.

You're making a big investment with your time and money when you choose to restore a pontoon boat. Making sure all of our customers know we will support them after the sale is important to us. We will take care of any problems you have quickly and at no cost to you, as we personally warranty everything we sell.

Our History

PontoonStuff® was founded on the idea that rebuilding a pontoon boat should be affordable and that you shouldn't need a payment to get that new boat feeling. With factory-grade pontoon furniture, flooring, and parts, we make it affordable to have a great-looking pontoon boat again!

Here are some quick facts about us:

  • We've been in business since 2005, and have helped over 200,000 customers fix up their pontoons. We sell to an average of 35,000 new customers per year.
  • We sell more replacement pontoon boat seats than all other marine retailers combined, and focus on offering everything you need for your pontoon restoration.
  • Designing, building, and selling our pontoon boat seats directly gives us a big advantage: We can invest more in quality because we control the entire process. 
  • All products are stocked and shipped from our facilities in Elkhart, IN and Dalton, GA.

Before building our own DeckMate brand of pontoon furniture in 2012, we sold nearly every brand of replacement pontoon seating, so we understand what makes a high-quality seat. Because of our experience with other seat brands, we knew where to focus our efforts in order to offer superior quality pontoon boat seats.

l shaped pontoon boat furniture

These pontoon boat seats make up our Premium PRG6383 pontoon furniture set.
1 - 55" pontoon boat lounge seats
1 - 28" pontoon boat corner seat
1 - 28" pontoon boat bench seat
1 - Right side pontoon boat seat arms with cup holders

38" Pontoon Bench Seat Parts

38" Pontoon Seat Bench Line Drawing

1 – Insert stud bolts (E) into the T-Nuts located in the black plastic bar on the bottom of the Back Rest Cushion.

2 – Place the Back Rest within the designated spaces and secure and tighten the 1” Washers © with the Wing Nuts (B) from the inside of the base.

3 – Align hinges attached to the Seat Cushion with the inserts located on the front of the base.

4 – Secure the Seat Cushion to the base with the 1/2” Bolts (D) (You can adjust the hinges left and right, up and down, to get the best fit.)

Click the Ask a Question button.

QUESTIONS & ANSWERS

Ask a Question
  • I measured my rear and got 99 inches from port side to starboard side what size furniture do I get.....I also measured from the rear fence to middle gate and got 131 1/2 inches we are hoping to get a wrap around seat for that whole side and back do Is this possible

    You would want to pick out what combination of seating you would like. The Pontoon Groupings are just for convenience. Please email (support@pontoonstuff.com) us when you have the following measurments from this link. https://www.pontoonstuff.com/pages/replacement-pontoon-boat-seats

  • Can they be purchased without the base. I just need to replace the cushions and would rather not get into the extra work.

    Unfortunately we do not offer just our pontoon seat cushions. The reason is they are designed to fit our bases only and the way they attach and the size of them makes it impossible for the seats to mount on furniture made by another manufacturer. The back rest cushions have an attachement design on the bottom that mates into our plastic seat bases. Thank you for the opportunity.

  • can i get a set with a left hand cup holder instead of the right one in the picture?

    Yes absolutely but we don't have that exact layout pre-built like this one. If you jump on our Deck Designer software you can build out your interior easily and it will price it out for you.

    https://www.pontoonstuff.com/pages/deckdesigner

  • How tall is this

    30" is the total height of each pontoon seat. Looks like we are missing some furniture dimensions on this page, I'll make sure we get it updated ASAP. Thank you for your question and the opportunity!

  • Can i get cup holder left side

    Yes, you would need to order a Left Arm Rest Separately to add to this package. 

Reviews for Pontoon Boat Seats (PRG6383)
5 out of 5, based on 1 reviews
Gary from North Carolina on Sep 25, 2014
I took our 1995 Sanpan down to the stringers this year and replaced the wood, carpet and rear seats. I wanted something that would hold up but was affordable. This seat set satisfied both of these requirements. The seats were very easy to install and look great. The battery and oil tank fit perfect in the rear 28" seat. One thing that I didn't notice when I ordered was that the seat base for the 55" bench is actually 2 separate 28" bases - not one long seat base. I kind of wanted one long seat base but with 2 I was able to put the table legs and noodles in one and the PDFs in the other. We haven't even used the corner base storage but there is plenty of space in there as well.

I purposely waited for the season to be over prior to writing a review to make sure that these seats would feel as good as they did at the beginning of the season and look the same as well. I am happy say that they have held up great and look as good as the day that I pulled them out of the boxes.

We were happy enough with the seats that we are planning on purchasing the "Left Lean Back" this winter to finish off the rear seat setup and might possibly consider putting furniture back up in the front of the boat because of the great quality.

All in all...you can't go wrong with these seats!

Our brands

Liquid error: Could not find asset snippets/iwish_v2.liquid