Pontoon Trailer Guide Ons

Pontoon Boat Trailer Parts

FREE Same Day Shipping Order By 4pm. Seats In Stock.

Set of 4 trailer guide posts with mounting hardware.

Trailer guides to help you load your pontoon boat in rough waters. 

Will mount to pontoon trailers with frames ethier 2"x3" or 2"x"4". 

  • Sold as a set of 4 guide posts with mounting hardware.
  • 22" overall height of each load guide post (4 per order).
  • Load your pontoon then install guides 2-3" way from tubes.
  • Mounting hardware is included.
  • Powder coated black steel with black bunks.


Ask a Question
  • I have a 2016 Bennington 24 SSRX Tri-Toon with lifting Stakes, which type of guides do you recommend ? The web site only shows Standard Pontoon Guides. Where do I find the completely Vertical ones you mentioned in the questions and answer section for Tri-Toons.

    We have tested the Standard Pontoon Trailer Guide Ons and it appears that the Standard ones work just as well with the Tri-Toons. 

  • I have a Tritoon. The picture I have only shows 1 guide on the rear cross bar. I have all 4 guides - identical. So I mount them to the 2 rear most cross bars - correct?

    Yes. That is correct. You will want to spread them out evenly. This will allow for the best help while using th Pontoon Trailer Guide Ons. 

  • Looking at the picture with the two trailer guides mounted one behind the other, I'm confused. Why do you have the more up write one behind the slanted one? Don't see the purpose. Does it go on the front of the trailer?

    The picutre you are referring to is showing the diffrence between the two type of load guides we offer. The slanted one is for a regular pontoon boats with 2 toons. The one that is completely vertical is the load guide for tri-toons. I'm sorry for the confussion but we are still in the process of updating this page. 

  • My trailer is 1.5" x 3" channel. do you think they might work if I put a spacer to bring the width up to 2"?

    Yes, it would work but could also weaken the connection between your boat trailer and the trailer guide on. I would keep this in mind as you add a spacer. In winding and rough conditions you will want the load guide to be strong as possible. 

  • How close to the pontoons do you install the guides? Do you leave a little room, or do you place these up against the pontoons?

    Trailer pontoon guide ons should be mounted 2" to 4" form your pontoon tube. 

  • How good are these in deeper water ramps? What if the back one is under water?

    These ponton guides will work just fine in deeper water. Even if the pontoon guides are almost fully sumerged they should still help quide your boat on to your pontoon trailer. 

  • What is the actual size of the U-bolts? I assume they are square bend with 2" between the bolts, are they 5/16" or 3/8" diameter bolts? I am going to need to purchase longer ones to fit my trailer

    The bolts on the Pontoon Trailer Guide Ons are going to be 3/8" in diameter. 

  • can these guides be used with a 3 pontoon boat

    No these Pontoon Trailer Guide Ons can not be used with Tri Toons. 

  • Should I install carpet on the guides? Or are they designed to be used without carpet?

    No, these Pontoon Trailer Guide Ons do not need carpet installed on them. They are designed to work without them.

4.6 out of 5, based on 7 reviews
Tracy from Michigan on Aug 30, 2017
The pontoon guide on's work great! keeps back of boat inline with trailer while loading. Loading in windy conditions are no problem. Great price for the set of 4. Strongly recommend for pontoons. My boat is 20' and I love them.
Bruce from Lago Vista, Tx on Jul 06, 2017
I have been using these for the last 6 months. OUTSTANDING. Before I had to take two to four shots at putting the boat on the trailer. Messed up two sets of type x guides. with these I am able to drive on first time every time.
Tom Bickel from Northumberland,Pa on Jun 12, 2017
As a first time boat owner the trailer guides have made trailering so much easier. Normally one or two tries. Installation was easy. Excellent customer service! Received my purchase in three days. Well done Pontoon Stuff!
Bob from Wolf Creek, MT on Apr 28, 2017
Nicely made. Nice hardware. Will work perfectly. Baked on finish matches trailer.
Nick S from St Paul, MN on Apr 24, 2015
These guide ons appear to be very well made and they are very sturdy. I have read reviews on other guide ons where people complain of them bending, you WILL NOT bend these ones! They are very helpful when loading my 22.5' pontoon on my bunk trailer. They definitely help take out the guess work and relieve stress when loading, for a new boat owner like myself. Due to a shipping error, I only received 3 of the 4 guide ons in the package. I made a call to their support line and received the 4th a few days later, no questions asked. I am very happy with this purchase.
Craig Curtis from Overland Park, KS Truman Lake, MO on Aug 12, 2014
these things are great! put me on the bunks every time the first time! My brother hadn't seen me load since I put them on. I came in on the first shot, strapped it up and had them haul me out. He asked if I was going to see if I was on the bunks. I told him no I don't need to anymore. Man was he surprised!
Ross from Maxton on May 12, 2013
Fast Shipping..a Must Have for pontoon boats..1st time buyer from this vendor and very Happy with the product and service..

Our sites