Heavy Duty Pontoon Boat Tops (8'6" W x 10' L Pontoon Bimini)
8' 6" W x 10' L pontoon canopy top package complete w/ frame, fabric and boot.
8' 6" x 10' heavy duty pontoon boat bimini top package .
Bimini top package includes 1-1/4" framework w/ adjustable front struts, mounting hardware, wiring, zip on premium solution dyed polyester fabric and storage boot.
- Easy to assembly bimini frame snaps together with stainless steel snap buttons.
- Zippered pockets allow you to quickly install your pontoon boat canopy top fabric.
- Adjustable front struts replace straps for more secure mounting.
- Stainless mounting bolts are included to secure your frame's brackets to your railing.
- Stainless push pins attach framework to your pontoon boat quickly and easily.
- Framework is designed to fit 8-1/2' wide pontoon boats with railing between 96" to 102" wide.
- Standing height in center of open canopy top is approximately 75".
Questions & AnswersAsk a Question
Do u have sides that can be added to your pontoon top
I think you are referring to the flaps of fabric that come down from the top of the bimini and snap to the railing. Unfortunately our bimini tops are not designed this way, we only use small flap in the rear to give it a more custom look. We stopped producing the tops with full length tails due to visibility issues, the boat manufacturers all switched styles due to this also.
Do you have wider frames? (9 1/2'w)
Unfortunately the 8-1/2' wide frame is the largest we offer for our pontoon boat tops.
Can I get just the cover? I have the exact same frame.
Do you have one of our frames? If you have the same size frame but it's from a different manufacturer it will not work. Did you have a warranty issue? If something has happened to the top you purchased from us we will just replace it for you.
Do you sell the 10 foot long x 8 feet wide Bimini top by it self without the frame
Unfortunately we do not, only the 8' x 8' fabric is universal enough to sell alone. The larger pontoon bimini tops tend to be very custom and unique on each pontoon boat. The pontoon manufacturers have used 9', 9-1/2' and 10' L tops in the past and with so many variations in the framework for the larger bimini tops we were never able to build one that was universal enough to fit. We have tried selling our fabric top by itself but the return rate has always been over 50% so we stopped.
do the support struts have to be mounted vertically or can they be on an angle?
We recommend that you mount your pontoon bimini as close to 90 degrees from your rail as possible. This help to ensure that the pontoon fabric top fits nice and taught. If you are unable to do this the struts do adjust so you can adjust them to get a good fit.
CAN I GET BLACK FRAME
Unfortunately we only offer our pontoon boat bimini top frames in anodized aluminum, we cannot offer custom colors.
What is the recommended maximum speed for this Bimini Top?
While traveling in your pontoon boat on the water we recommened not exceeding 30 mph with the top fully open. While trailering your boat we recommened that you close your top competely and lower it so it rest on the rails on your pontoon boat.
How much does the bimini top weigh? The reason I ask is on my old pontoon, I was able to easily raise and lower by myself - it was made of aluminum with front straps. On my newer tritoon, it has stainless steel round frame - including metal front struts and it weighs a lot more and is a lot harder to raise and lower by myself.
This pontoon bimini frame and fabric will weigh about 45 lbs when fully assembled. You may want to look at our power bimini frame and fabric. It is more expensive but is the perfect solution to your problem. I have included a link below.
Pontoon Power top
Is there electrical wiring in the frame for a stern light in the 8 1/2 x 10 heavy duty pontoon canopy?
Yes, the electrical wiring for your pontoon stern light is included in this heavy duty pontoon canopy. You will need to run the wire through the frame when you install the pontoon bimini frame on your pontoon boat.
I have a 2005 Bentley 24 ft Pontoon and the hardware is perfect but I need just the cover is that possible and if so how much is it
Unfortunately, we do not sell the 8'6" x 10' bimini fabric by themself. We have tried but the return rate is very high. What we found is that beyond the standard 8' x 8' universal fit pontoon bimini top fabric we sell the larger frames are more custom and depending on the boat manufacturer and our fabrics simply don't fit well. .
My rails are 1/4 inches diameter. Will these brackets fit over the rail?
This pontoon bimini top and frame is designed to fit a square railing that 1 1/4 inches wide. It sounds like this pontoon bimini frame will not work if your pontoon boat rails are only 1/4" in diameter.