Pontoon Boat Corner Caps
Universal pontoon boat deck corner cap.
Replace your pontoon boat's cracked or missing deck corners.
Cast aluminum pontoon corner cap with 1-1/2" radius. Fits most older pontoon boats, you can easily modify the edges of your plywood easily enough to accommodate the small radius.
- Sold individually.
- Bolt down to your deck, fasteners are not included.
QUESTIONS & ANSWERSAsk a Question
I have a 89 suntracker 24ft party barge I’m rehabbing and need all corners will these work?
Since all of our Pontoon Boat Products are universal, you will need to compare the measurements of your available space and our measurements for the Pontoon Boat Corner Cap.
i have a 2005 southland horizen pontoon and i need 2 aluminum corner caps will this fit
Since we are not Pontoon Boat Specific, and our products are universal. You would need to compare the measurements you have to ours and then make the educated decision.
Will this fit a 2001 Lowe’s pontoon 20ft on the back?
Unfortunately nothing is standard in the pontoon business and builders tend to change with every year so knowing the model won't tell us exactly what we need. So, we recommend comparing the measurements of the Pontoon Boat Corner Caps to your available space.
I have a 1991 21 footer sun tracker , would this corner work on this boat
Since our products are universal and not boat specific, we require measurements to make sure that we are finding the best Pontoon Boat Corner Cap for your Pontoon.
I am searching for the rear corner caps for my 2012 sun chaser DS 22
We do not offer specific Pontoon Boat Parts. We only have the Pontoon Boat Corner Caps that you find on that page.
1996 JCTritoon front right and left corner caps. Do you have anything that would work. 45 degree angle.
Since our products are not boat specific, you would need to match our measurements to your measurements to make sure it will fit with 100% certainty. Here are the Pontoon Corner Caps that we have available https://www.pontoonstuff.com/search?q=Corner+Caps
2006 sunchaser 820 ?
Our Pontoon Boat Corner Caps are not boat specific. You will want to match our measurements to the currect measurements on your boat.
I have a 1999 Sylvan 20 ft. pontoon will one of these Radius corner fit
It all depends on the measurements of your current Pontoon Boat Corner Caps. If the measurements posted on our web pafe match then you should be just fine.
We have a 2007 Bentley 240 Fish pontoon. One of the corner caps (port rear cap) sheared off against a dock when it was very windy and lake was high. where can I get a replacement?
Unfortunately we won't have an exact match for your pontoon corner cap. The boat manufacturers own the tooling for the cast aluminum corner caps so they are not easily found in the replacement market. The closest we could get would be this style cap: https://www.pontoonstuff.com/collections/pontoon-boat-parts/products/radius-pontoon-corner-caps
You may need to replace both the fronts if you want them to match. I'm sorry we could not offer an exact fit but the manufacturers have this items custom made.
I have a 1998 Model 226 JC Tritoon O need the Starboard Side Rear Corner Cap
I looked your that pontoon boat model up and found a photo of that corner cap... that's a tough one and unfortunately we don't have it. That is a cast mold and JC would own it, they designed it and would own the mold that makes it so the only chance you'd have to find a replacement would be on eBay or something like that. You could try to contact JC Pontoons at (574) 834-2881, they are located in North Webster, Indiana. Sometimes their parts department may have parts like this in old inventory.
The main problem with specialized parts like this is that no single pontoon builder makes enough of any one model in any given year so they don't have a lot of spare parts. Also, they change everything so often that finding a match becomes near impossible. For example, they probably used that corner casting for 2 years and then changed it... Wish we could be more helpful but hopefully the folks at JC Pontoons can help!
My toon is a 1990 lowe, 24ft. needing a couple of corners, will these work?
You would need to compare measurements of the corner caps to your available space and determine it that way.
Do you have corner caps with mooring eye
No we do not carry any Pontoon Boat Corner Caps with a Mooring Eye.
Good morning. I've a 1988 24 footer Lowe's pontoon, just moved from Wisconsin to illinois, this morning I noticed a missing deck corner, do you sell them? Thanks
Unfortuantely, we do not sell specific corner caps for makes and models of Pontoon Boats.
Hi, what does the back of cover look like? Is it flat, or conform to book rail?
Yes, these are flat on the underside of the Corner Cap.
I have a suntracker 1985 party barge. doyou make these with cleets
No they come as pictured on our website and we do not have any custom parts available
Will these fit my boat?
You will need to compare the measurements that you have to ours to see if these items with work for you.
I have a 2000 smoker craft pontoon . Will these corner caps fit the front ones ? Thanks
You will need to compare your measurements to ours to find out if these will work for you.
I am searching for a right corner cap for my 1994 fisher freedom 22 pontoon boat
You will need to compare your measurements to ours to determine if they will work for your make and model Pontoon.
I'm turning my old pontoon boat into a swim platform. I have re-decked and am putting 2" x 3" aluminum L-bracket along the sides and front. The 4 corners will come to a perfect right angle. I am looking to put rounded corner caps on so the kids don't get sliced open. Will this fit over a right angle corner? Thank you
This Corner Cap has a smal radius. Unless you trim down the decking to match the 1 1/2" radius, these corner caps will not fit.